BMW R50 Installation Instructions Manual
Retrofit hands-free kit for siemens mobile phones series 35 and 45 for bmw mini
Hide thumbs
Also See for R50:
- Instruction manual (162 pages) ,
- Installation instructions manual (18 pages) ,
- Installation instructions (5 pages)
Table of Contents
Advertisement
Quick Links
Retrofit Hands-Free Kit for Siemens Mobile Phones Series 35 and 45
MINI (R50 and R53)
The installation time is approx. 2 hours, but this may vary depending on the condition of the car and the
equipment in it.
Retrofit/Installation kit No.
Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864
Installation Instructions No. 01 29 0 142 863
Parts and Accessories
Installation Instructions
84 64 0 139 563
84 64 0 142 864
Issue date: 10.2001
R50 0214 Z
Advertisement
Table of Contents
Related Manuals for BMW R50
Summary of Contents for BMW R50
-
Page 1: Installation Instructions
R50 0214 Z Retrofit Hands-Free Kit for Siemens Mobile Phones Series 35 and 45 MINI (R50 and R53) The installation time is approx. 2 hours, but this may vary depending on the condition of the car and the equipment in it. -
Page 2: Table Of Contents
Contents Section Page Important information ..............Preparations . -
Page 3: Important Information
Important information The retrofit kit is only for use within the dealership organisation. Do not kink or damage the cables during the installation work since otherwise they may cause faults that can later only be identified by extensive additional work. The costs incurred as a result of this will not be reimbursed. -
Page 4: Preparations
Preparations TIS instruction No. Conduct a brief test Disconnect the negative pole of the battery 12 00 ... The following components must be removed first of all: Oddments box in instrument trim on the passenger side 51 16 390 Trim between front centre console and instrument panel 51 16 198 Radio 65 11 030... -
Page 5: Parts List
Parts list R50 0215 Z Legend Mobile phone holder Retaining plate for the mobile phone holder Loudspeaker Hands-free control unit Gooseneck Holder for hands-free control unit Wiring harness Hands-free microphone Plug contact (4x) 10 Plug casing (4x) 11 Socket casing (4x) 12 Socket casing (4x) Retrofit / Installation kit No. -
Page 6: Installation And Cabling Diagram
Installation and cabling diagram R50 0216 Z Legend Radio plug X18126 Wiring harness Hands-free control unit Gooseneck with mobile phone holder Hands-free microphone Loudspeaker Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864 EN/6 Installation Instructions No. -
Page 7: Hands-Free Kit Connection Overview
Hands-free kit connection overview R50 0223 Z Cable colour / Item Description Signal Connection location in the car Abbreviation / Slot Cross-section Wiring harness Cable branch Earth With enclosed socket and plug contact on radio plug X18126 0.75 mm With new generation radio... -
Page 8: To Install And Connect The Wiring Harness
- A3 , VI cable, to VI/GR cable on PIN 16 - A4 , SW cable, to WS/BR cable on PIN 10 See figure R50 0248 Z for the procedure R50 0250 Z Cars without a new generation radio only Connect branches A1 –... -
Page 9: To Install The Loudspeaker
Unscrew both knurled-head bolts (1) and remove the holder (2) from the loudspeaker (3). Drill a 5 mm hole in the centre of the holder (2). R50 0202 Z Screw the holder (1) to the trim (3) using the existing Torx screw (2). -
Page 10: To Install The Hands-Free Microphone
Carefully lower the front headlining. Route the microphone cable (4) beneath the headlining towards the A pillar on the passenger side. R50 0205 Z Route the microphone cable (1) to the oddments box on the passenger side. R50 0219 Z Retrofit / Installation kit No. -
Page 11: To Install The Mobile Phone Holder
To install the mobile phone holder Undo the Philips screws (1) and remove the rear cover (2). R50 0247 Z Place the retaining plate (1) onto the gooseneck (2) and mark the outline. Drill a 17 mm hole (3) in the bottom area as shown. - Page 12 To install the mobile phone holder Push the mobile phone holder (1) onto the retaining plate from the top. R50 0226 Z Install the radio. km/h Install the gooseneck (1) and attach the connection cable (2) as shown using cable ties (3). Route it to the oddments box on the passenger side.
-
Page 13: To Install The Hands-Free Control Unit
To install the hands-free control unit Screw the hands-free control unit (1) onto the holder (3) using Philips screws (2). SIEMENS R50 0208 Z Connect the microphone cable plug (1), the mobile phone holder plug (2) and branch A7 to the hands-free control unit (3). -
Page 14: Concluding Work
10. Concluding work - Connect battery - Conduct a brief test - Conduct a function test - Assemble the car following the instructions to dismantle it in reverse order. Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864 EN/14 Installation Instructions No. -
Page 15: Hands-Free Kit Circuit Diagram
X18126 0,5 SW 0,5 SW/WS 0.75 0.75 0.75 0.35 R50 0227 Z Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864 EN/15 Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001... - Page 16 X18126 0,5 SW 0,5 SW/WS 0.75 0.75 0.75 0.35 R50 0228 Z Retrofit / Installation kit No. 84 64 0 139 563 / 84 64 0 142 864 EN/16 Installation Instructions No. 01 29 0 142 863 Issue date: 10.2001...
- Page 17 11. Hands-free kit circuit diagram Legend Hands-free control unit Hands-free microphone Loudspeaker Mobile phone holder SW 2-pin pawl plug SW 12-pin plug SW 6-pin plug Twin-lead terminal Twin-lead terminal Twin-lead terminal Twin-lead terminal X18126 Radio plug Butt-joint connector Butt-joint connector To standard wiring harness All designations with an asterisk (*) only apply to these installation instructions and these circuit diagrams.