Download Print this page

BMW R50 Installation Instructions

Audio ipod interface
Hide thumbs Also See for R50:

Advertisement

Installation Instructions
Audio, iPod Interface
SUBJECT
®
iPod
Interface Kit – P/N 65 11 0 392 139
MODEL
MINI Cooper (R50):
MINI Cooper-S (R53):
MINI Convertible (R52):
* Not compatible with 6-Disc CD Changer (SA672), Sirius Satellite Radio, or Hands-Free Phone System.
SUGGESTED INSTALLATION TIME:
The instructions below are developed for MINI vehicles and are not be compared to any other existing
instructions for vehicles other than MINI. No methods other than those specified in this document are to be used
for installation in MINI vehicles. Left and right are determined from driver's seat.
Carefully read all instructions and supplements before proceeding with the installation. Reference should be
made to TIS for instructions dealing with a stock part of the vehicle but not stated in detail in these instructions.
The instructions were complete and up to date at time of publication; however, changes to the vehicle or
installation may have occurred. Please report any problems or changes noted with the installation to BMW
Technical Hotline, along with VIN, date of manufacture and as much detail as possible.
PARTS INFORMATION
Contents of Kit – P/N 65 11 0 392 139
Description
iPod Adapter
iPod I/F cable
Radio I/F cable
Rubber Grommet
Owner's Manual
SPECIAL TOOLS
Pin Removal Tool – 61 1 134
Crimp Tool – 408 449
DO IT RIGHT THE FIRST TIME, ON TIME, EVERY TIME
Installation Instruction P/N 01 29 0 393 657
MINI, a division of BMW of North America, LLC
© 2004 BMW of North America, LLC
Select Vehicle Production 03/02 – On*
Select Vehicle Production 03/02 – On*
Select Vehicle Production 09/04 – On*
0.5 Hours
QTY
MINI Part Number
1
65 11 0 392 138
1
65 11 0 393 656
1
65 11 0 392 142
1
1
65 11 0 392 140
Page 1 of 5
November 2004
Ver 1.0
Accessory
Development
N/A

Advertisement

loading

Summary of Contents for BMW R50

  • Page 1 The instructions were complete and up to date at time of publication; however, changes to the vehicle or installation may have occurred. Please report any problems or changes noted with the installation to BMW Technical Hotline, along with VIN, date of manufacture and as much detail as possible.
  • Page 2 5. Strip 1/8” of wire shielding from 4 wires. 6. Using terminal crimping tool (BMW p/n 408 449 or Snap-on PWC47) crimp new female bullet connectors included in kit onto each of the wires from previous step.
  • Page 3 8. Insert 4 rectangular pins from iPod harness (1) into radio harness (2) as follows: Color Location Description White/gray I-Bus Brown Ground Violet/white KL-R Red/green KL-30 9. Remove white 12-pin connector (3) from lower section of radio connector. 10. Insert white 12-pin connector (1) from iPod harness (2) into lower left section of radio connector (3).
  • Page 4 14. Insert iPod cable (1) through hole in glovebox as indicated. Note: Split grommet as shown before placing around iPod cable in order to prevent damage to cable. 15. Split grommet (1) as indicated (2) and insert grommet through hole in glovebox wall. 16.
  • Page 5: Troubleshooting

    21. Mount iPod interface as indicated below radio and secure with cable ties(not included). 22. Re-install all components removed for installation procedure. VEHICLE CODING There is no vehicle coding required for this installation. TROUBLESHOOTING • iPod mode is not selectable from the radio until an iPod is connected. (refer to MINI iPod Interface Owner’s Manual) •...

This manual is also suitable for:

R5265110392139