Turning Terminal On/Off; Suspending/Resuming Terminal; Hardware Maintenance - Honeywell Dolphin 6000 User Manual

1. Navigate to the Power Menu by selecting > Settings > System > Power.

Turning Terminal On/Off

To turn the Dolphin 6000 terminal on:
1. Press and hold the Power button for 3 seconds.
Note: Turning the terminal off is the equivalent to a hard boot.
To turn the Dolphin 6000 terminal off:
1. Press and hold the Power button for 5 seconds.
2. Tap OK to shutdown.

Suspending/Resuming Terminal

To put the device into Suspend mode when the terminal is powered on:
1. Press and release the power button.
2. To resume from the Suspend mode, press and release the Power button.
The terminal goes into the Suspend Mode automatically when it is inactive for a period of time. To set a time interval,
select > Settings > Power > Advanced. Refer to Power on page 7-13.

Hardware Maintenance

When needed, clean the image engine window and the touch screen with a clean, non-abrasive, lint-free cloth. The terminal can
be cleaned with a damp cloth.
3 - 11