Parts and Functions
Front Panel
Terminal Well
Place the Dolphin 6000 in the terminal well to use the terminal and to charge a battery pack in the terminal. The HomeBase
charges the battery in 4 hours. If the host terminal is a workstation that uses ActiveSync, synchronization begins immedi-
ately.
AUX Battery Status LED
The AUX battery status LED shows the status of battery charging in auxiliary battery well; see
Status
Pre-charge (for a very low battery)
Fast Charge
Full (completed charge)
Battery cannot be charged
No Battery
Fault or Over Temperature
Note: For information about charging a battery in auxiliary battery well, see
Well
on page 12-5.
12 - 2
Terminal Well
Charging LED
LED color
Orange
Red
Green
Orange Blinking
Off
Off
Auxiliary Battery Well
Back Panel
Charging a Battery in the Auxiliary Battery
on page 12-3.