Honeywell Dolphin 6000 User Manual page 86

Pairing and Trusted Devices
The terminal does support pairing. Pairing happens during general connection setup. Paired devices are "trusted" devices. This
means that there is unrestricted access to all services (including services that require authorization and authentication).
A connection can exclude pairing. A device that is connected to the terminal but not paired with it is considered an untrusted
device. Content can still be passed to untrusted devices by requiring authorization with each attempt (for example, with the ini-
tialization of a file exchange). The Beam File method of file transfer can be used to pass a file as an untrusted device;
Transferring Files on page
Connecting to Other Bluetooth Devices
To connect to other bluetooth devices, you need to perform a device discovery, select a discovered device, and then connect to
the selected device. Pairing happens as part of the connection process.
1. Make sure the Bluetooth device is in range and set to be discoverable by other Bluetooth devices.
2. In the Dolphin Wireless Manager, tap Menu > Bluetooth Settings.
OR
Tap > Settings > Bluetooth
3. Tap Add new device. The terminal begins searching for discoverable Bluetooth devices.
4. Select a device from the list and tap Next.
The types of devices in the
vicinity of the radio appear in
the list of discovered devices.
10 - 2
10-4.
.
see