Panasonic KX-NCP500 Installation Manual page 39

Activation Key Type
CA Supervisor 1user
Software Upgrade 01
*1 You need to set the number of the installed activation key to be used for H.323 CO lines through system programming. By default,
all the installed activation keys will be used for SIP CO lines.
*2 You can set how many IP softphones can be used with the installed activation keys through system programming. By default, only
IP softphones can be used with the installed activation keys.
Preinstalled Activation Keys in the DSP Cards
The following type and number of activation keys are preinstalled on the DSP card:
Card Type
DSP4
8-Channel IP Proprietary
DSP16
8-Channel IP Proprietary
DSP64
8-Channel IP Proprietary
Depending on the number of IP CO lines and IP-PTs to be used, you need to select the DSP card from the
above.
Additional Activation Keys in the SD Memory Card (Activation Key Files)
When the number of preinstalled activation keys on the DSP card is not enough for the desired configuration
or when you wish to use enhanced features, additional activation keys in the form of activation key files can
be installed on the SD Memory Card.
The following type and number of additional activation keys can be installed on the SD Memory Card:
Activation Keys for IP CO Lines
Model No. Activation Key Type
KX-NCS3102
2 IP Trunk
KX-NCS3104
4 IP Trunk
Document Version 2011-10
Description
Allows the use of CA ACD Monitor
for 1 ICD Supervisor.
Upgrades software to use enhanced
features.
Activation Key
4-Channel IP Trunk
Telephone
4-Channel IP Trunk
Telephone
4-Channel IP Trunk
Telephone
30
15
Maximum
Number
4
1
Supported IP CO Lines/IP-PTs
1 4 IP CO lines (H.323/SIP)
1
1 4 IP CO lines (H.323/SIP)
1
4 16 IP CO lines (H.323/SIP)
4
Maximum Number/Supported IP CO Lines
with DSP4/DSP16
60 IP CO lines
(H.323/SIP)
2.1.1 Activation Keys
Supported IP CO Lines/IP
Telephones/CA Users
4 users
-
8 IP-PTs
8 IP-PTs
32 IP-PTs
with DSP64
24
48 IP CO lines
(H.323/SIP)
12
Installation Manual 39