GE Monogram ZGU36K Owner's Manual page 16

re and (;leaning
Gas ( ooklop
Burner
grates
Cast-iron burner grates should be washed
regularly and especially atter spillovers.
The grates can be cleaned in a dishwasher or
wash them in hot, soapy water and rinse with
clean water, \/o/t
tll}lV
}llso ttse abrasive cleaners
and steel wool pads to clean the burner grates.
Dry the grates with a cloth--do not place them
on the cooktop when wet.
Although they axe durable, the grates will
gradually lose their shine, regardless of the
best care you can give them. This is due to
their continual exposure to high temperatures.
Do not operate a burner for m_ extended
period of time without cookware on the grate.
The finish on the grate may chip without
cookware to absorb the heat.
After cleaning, replace the center grate first
with its locking side robs toward the ti'ont.
Replace the side grates so that their side edges
lock over the tabs on the center grate. Make
sure the grates are positioned securely over the
burnet_ and that they are stable and level.
Rubber Grate Feet
For stability, your cooktop has rubber tibet on
the burner grates. If any of these tubber feet
should become damaged or lost, replace them
immediatelv,
To order replacement tubber grate teet, please
call our toll-fl'ee number:
National Parts Center .......... 800.626.2002
Rubber Grate beet ............ #WB02T10101
16