Sanyo CG1411 Service Manual page 87

OI-202-15EG
Operation with the Remote Control Unit (continued)
Press TEMP. to change the temperature setting.
To raise the temperature
setting
To lower the temperature
setting
The type of operation and the temperature setting will differ depending
•
on the ambient temperature when operation starts, as follows:
Ambient temperature
when operation starts
88 °F or higher
84 °F – less than 88 °F
80 °F – less than 84 °F
72 °F – less than 80 °F
Less than 72 °F
The operation mode (cooling, heating, dry) does not change
•
automatically during operation.
Although the fan speed is set automatically, you can change the fan
•
speed by pressing the FAN SPEED selector button.
To stop the air conditioner, press the ON/OFF operation button again.
TEMP.
Operation Temperature
type setting
82 °F
Cooling 80 °F
78 °F
Dry 76 °F
Heating 76 °F
Operation
lamp
Green
Orange
Red
15