Sanyo CG1411 Service Manual page 53

(6) How to detach ignition probe and flame sensor electrode
Detach the connector of the ignition probe.
Remove connector CN17 from outdoor unit PCB.
Remove the screw (1) for the attaching metal clip and remove the ignition probe and flame sensor elec-
trode. (Flame sensor electrode is replaced together with the wires connected.)
(7) How to detach burner unit
Remove the attachment screws (6) and pull the burner unit to the front. (When reattaching the burner unit,
replace the center screw first.)
(8) How to detach gas nozzle
Remove burner unit.
Remove the screws (2) attaching the nozzle.
49
(Rear view)