Remote Control Unit Installation Position - Sanyo CG1411 Service Manual

7-3. Remote Control Unit Installation Position

The remote control unit can be operated from either a non-fixed position or a wall-mounted position.
To ensure that the air conditioner operates correctly, do not install the remote control unit in the following places:
In direct sunlight
Behind a curtain or other place where it is covered
More than 26 ft. (8 m) away from the air conditioner
In the path of the air conditioner's airstream
Where it may become extremely hot or cold
Where it may be subject to electrical or magnetic interference
7-3-1. Mounting on a Wall
a) Removable mounting
1) Momentarily hold the remote control unit at the desired
mounting position.
2) Confirm that the air conditioner responds correctly when you
press keys on the remote control from that position.
3) After confirming correct operation, use a screwdriver to screw
the supplied special mounting screw into the wall. (Fig. 7)
4) Hang the remote control unit from the special mounting
screw.
b) Non-removable mounting
1) Momentarily hold the remote control unit at the desired
mounting position.
2) Confirm that the air conditioner responds correctly when you
press keys on the remote control from that position.
3) After confirming correct operation, use a screwdriver to screw
the mounting screw into the wall. (Fig. 7)
4) Remove the remote control cover by sliding it downward.
5) Remove the batteries of the remote control unit.
6) Use a screwdriver to screw the remote control unit securing
screw into the wall through the hole in the battery compart-
ment. (Fig. 8)
7) Replace the batteries.
8) Again confirm that the remote control unit operates correctly.
Non-removable mounting
28
Removable mounting
Special
mounting
screw
(Packed in indoor unit)
Fig. 7
Wall
Screw
(Packed in indoor unit)
Fig. 8
Wall