Keypad Indicator Lights; Zone Display; Alarm Memory Display - Paradox Spectra 1686H User Manual

2.2 K
EYPAD
All Spectra LED Keypads include colored lights which
convey the current status of your system. As explained in
Figure 2-1 the state of each light represents a specific
condition in your system.
2.3 Z D
ONE
The numerical buttons on the 1686V/H Keypads are
designed to communicate the status of the zones in your
system. Each button corresponds to a zone in your system. If
a button's light is off (extinguished), the corresponding zone is
closed. If a button's light is on (illuminated), the corresponding
zone is open (i.e. open door, movement detected, etc.).
2.4 A
LARM
If an alarm has occurred on a zone, the [
illuminate. All zones where alarms occurred will be stored in
memory. After disarming the system, press the [
to illuminate the buttons corresponding to the zones that
were in alarm (see Zone Display in section 2.3). To exit the
Alarm Memory Display, press [
will erase the contents of the Alarm Memory every time the
system is armed.
8 User's Guide
I
NDICATOR
ISPLAY
M D
EMORY
L
IGHTS
ISPLAY
CLEAR
] button will
MEM
MEM
] button. The system
] button