How To Start - Sears kenmore Vacuum Cleaner Owner's Manual

HOWTOSTART
Personal Injury and Product Damage Hazard
. DO NOT plug in if switch is in ON position.
Personal injury or damage could result.
* Thecord moves rapidly when rewinding. Keep
children away and provide a clear path when
rewinding the cord to prevent personal injury.
. DO NOT use outlets above counters. Damage to
items in surrounding area could occur.
Cord
Rewind
!, Pull cord out of
canister to desired
length, The cord
will not rewind until
the cord rewind
bar is pushed.
NOTE: To reduce the risk of electric shock, this
vacuum cleaner has a polarized plug, one blade is
wider than the other, This plug will fit in a polarized
outlet only one way, If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet, Do
not change the plug in any way,
2. Plug the polarized power cord into o 120 Volt
outlet Iocoted near the floor,
To rewind: Unplug the cleaner. Hold the plug while
rewinding to prevent damage or injury from the
moving cord. Push cora rewind bar,
Pile Height
Indicator
Hand{e
Release Pedal
Pi{e Height
Pedal
3, Lower wand from upright position by pressing on
the handle release pedal,
4, Select a pile height se#ing by pressing the small
pedal on the rear of the POWER-MATE
TM,
The pile
height setting shows on the indicator. See
SUGGESTED PiLE HEIGHT SETTINGS,
==
Select a switch position
on the handle.
OFF
FLOOR - turns on the canister motor only.
CARPET - turns on both the canister and the
POWER-MATF i motors,