Sears kenmore Vacuum Cleaner Owner's Manual page 7

CANISTER
I, Open the canister hood.
2. Check to see that the dust bag is properly
installed See BAG CHANGING for instructions
3. Check to see that the motor safety filter is properly
installed, See MOTOR SAFETY FILTERCLEANING for
instructions,
HOOD
It is normal for the canister hood to come off when
opened further than needed, Line up the hinges,
insert them, and close the hood to replace it.
HOSE
I li. Line up the hose
latch tab and notch
in canister hood
and insert hose into
canister untit it snaps
in place.
To remove: lift hose
latch tab upward
and puti up on hose,
2,insert handle
into wand until
lock button
snaps in place,
Be sure hose is
not twisted,
To remove: press
handle release
button and pulI
up on handle,
To store:
Disconnect hose
from wands and
canister to
prevent stress on
hose during
storage, Store
,hose in a loosely
coiled position
so the hose
covering is not
stressed.
Hose
Covet"
Canister
Performance
Indicator Light
(Some Models)
Hood Release Dust Bag