Sears kenmore Vacuum Cleaner Owner's Manual page 14

ANISTER CARE
CHANGING
For best cleaning results, the dust bag shouid be
changed often. The performance indicator will come
on when the bag needs to be changed or the
airflow is blocked. NOTE: See PARTSAND FEATURESfor
Bag #.
1. Unplug cord
from wati outlet,
2. Pull hood
release out and
up, then lift
canister hood,
3. Disengage
cardboard tab from
red bag mount by
pressing away and
lifting ui3,
4. Pull bag out of the
Red Bag
Mount
red bag mount.
5, Check and clean
motor safety filter,
The red bag mount
will flip forward after
removing bag, This
will prevent the lid
from closing until a
new bag is instal!ed,
6, Raise red bag
mount.
7. Install bag into slots per
illustrations pushing down
unfit the cardboard tab
iocks into position and the
holes align, Tuck the back
end of the bag down,
8. Close and latch
canister hood,
9, Plug cord into wall
outlet,
CAUtiON I
NEVERREUSEA DUSTBAG. Very fine materials, such I
as carpet freshener, face powder, fine dust,
piaster, soot, new carpet lint, etc, can clog the |
bag and cause it to burst before it is full. Change
bag more often when vacuuming these materials.,|..._
14