How To Start; Height Settings - Sears Kenmore L0711256 Owner's Manual

HOW TO START
HP:rso;al Injury and Product Damage
• DO NOT plug in if switch is in ON
position. Personal injury or
damage could result.
• The cord moves rapidly when
rewinding. Keep children away
and provide a clear path when
rewinding the cord to prevent
personal injury.
• DO NOT use outlets above
counters. Damage to items in
surrounding area could occur.
Cord
Rewind
Bar
1. Pull cord out of
canister to desired
length, The cord
will not rewind until
the cord rewind
bar is pushed.
NOTE: To reduce the risk of electric shock,
this vacuum cleaner has a polarized plug,
one blade is wider than the other. This plug
will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, con-
tact a qualified electrician to install the prop-
er outlet. Do not change the plug in any
way.
2. Plug the polarized power cord into a 120
Volt outlet located near the floor.
To rewind: Unplug the cleaner. Hold the
plug while rewinding to prevent damage or
injury from the moving cord, Push cord
rewind bar.
PIle eight
etor
_ Height
Pedal
Pedal
3. Lower Wand fi'om upright position by
pressing on the handle release pedal.
4. Select a pile height setting by pressing
the small pedal on the rear of the POWER-
MATE
TM.
The pile height setting shows on
the indicator, See SUGGESTED PILE
HEIGHT SETTINGS.
Select a switch
position on the
handle.
OFF
FLOOR - turns on the canistermotor only.
CARPET - turns on both the canister and
the POWER-MATE
TM
motors.
8