Cycle Status Indicators - Kenmore 665.15722 Use & Care Manual

No Heat Dry
Select this energy-saving option to dry without heat. No
Heat drying is useful when loads conta(n plastic
dinnerware that may be sensitive to high temperatures.
The dishes take longer to dry and some spotting can
occur. For best drying, use a liquid rinse aid. Some items
(such as plastics) may need towel drying.
NOTE: Quick Rinse automatically uses this option. No
Heat Dry is an option with all other cycles.
Control Lock On
3. Press DELAY START 1 time for a 2-hour delay, 2 times
for a 4-hour delay, or 3 times for a 6-hour delay.
2 4 6
gin
HOURS
The number glows above Delay Start. The dishwasher
starts the cycle in the selected number of hours.
4. Press START.
NOTE: To cancel the delay, press CANCEL/DRAIN until all
Delay Hours lights are off.
IMPORTANT:
Use the Lock to prevent your dishwasher from accidentally •
being turned on. Use the Lock, also, to prevent accidental •
cycle or option changes during a cycle.
41D
CONTROL LOCK
When CONTROL LOCK is lit. all buttons are disabled.
NOTES:
• The dishwasher door can be opened while the controls
are locked.
• You can turn on the Lock while the dishwasher is
running,
To turn on the Lock
Press and hold
for 4 seconds. CONTROL LOCK glows.
If you press any pad while your dishwasher is locked, the
tight flashes 3 times.
To turn off the Lock
Press and hold NO HEAT DRY for 4 seconds. The light
turns off.
Delay Start
Select this option to run your dishwasher at a later time or
during off-peak hours.
To delay the start
1. Close the door.
2. Select a wash cycle and options.
Operate your dishwasher only when you are at home.
If your home is equipped with a water softener, do not
start the dishwasher during the regeneration of the
soften
Follow the progress of your dishwasher with the Cycle
Status Indicators, CLEAN glows when a cycle is finished.
The light turns off when you open the door or press
Cancel/Drain.
O I O g Q O
WASHING WATERHEATING RIN SFNG DRYING CLEAN CONTROL LOCK
Water Heating
WATER HEATING glows, and the cycle progression
pauses, whenever water is heated during a cycle. Wash or
rinse action continues as the water heats.
Control Lock
When CONTROL LOCK is lit, all buttons are disabled.
qlD
CONTROL LOCK
You can turn on the Lock while the dishwasher is running.
To lock or unlock the controls, see "Option Selections."
T
5 ¸
15