Kenmore 911.93361 Owner's Manual page 17

CLEANING MATERIALS TO USE:
o Dishwashing detergent
o Warm water
,, Soft cloth
MOLDED
RIB
_ CAUTION:
Be sure the oven light switch is
in the offposition. Do not touch
a hot light bulb with wet hands
or a wet cloth. Wait until the
bulb has cooled and use a dry cloth.
Never touch the five collar of the bulb. if
you are replacing a broken light bulb,
make sure the power supply is off.
SPRING
CLIP
"tO REMOVE
1. Be sure the control knob is in the off
position,
2, Pull straight off the stem, Using a piece of
string can make removing the knob easier..
Slip the string under and around the knob,
pulling straight out.
TO CLEAN
Wash the knob thoroughly with soapy water
Dry completely with a soft cloth. DO NO T let
the knob soak.
TO REPLACE
t. Check the back of the knob. The molded
rib of the knob is designed to fit perfectly
onto the knob stem.
2. Align the molded rib to the clear groove in
the knob stem,.
3. Push the knob back as far as it will go..
_,._ GLASS
RETAINER
LIVE COLLAR
GLASS_
COVER
TO REPLACE
1. Unscrew glass cover and remove..
2. Unscrew the light blub,
3o Replace the bulb with a 3 1/2 ° 40 watt
appliance bulb.
4, Replace the cover.
17 removable parts continued