Setting | Signal (Video) - ViewSonic Pro10100 User Manual

SETTING | Signal (Video)

"Signal" is only supported when the source is Video or S-video.
White Level
Allow user adjust White Level when inputting S-Video or Video signals.
Black Level
Allow user adjust Black Level when inputting S-Video or Video signals.
Saturation
Adjust a video image from black and white to fully saturated color.
Press the ◄ to decrease the amount of saturation in the image.
`
Press the ► to increase the amount of saturation in the image.
`
IRE
Adjust measurement of composite video signals.
"IRE" is only supported on NTSC signal.
Projector ID
ID definition can be set up by menu (range 0-99) to indicate an individual projector.
45