Options | Lamp Settings - ViewSonic Pro10100 User Manual

Remote code: show the remote code of the projector.
Remote code(Active): show the remote code of the remote control.
Reset
Choose "Yes" to return the display parameters on all menus to the factory default
settings.
The following settings will still remain: Phase, H. Size, User, Language, Projector
Position, High Altitude Mode, Security Settings, and Keystone.

OPTIONS | Lamp Settings

Lamp Hours
Display the projection time.
Lamp Reminder
Choose this function to show or to hide the warning message when the changing
lamp message is displayed.
The message will appear 30 hours before suggested replacement of lamp.
Lamp Mode
Normal: Choose "Normal" to increase the brightness.
`
ECO: Choose "ECO" to dim the projector lamp which will lower power
`
consumption and extend the lamp life.
Power: Power improves the contrast of the picture by optimizing the brightness
`
of the lamp according to the picture content.
Lamp Reset
Reset the lamp hour counter after replacing the lamp.
55