Setting | Signal (Rgb) - ViewSonic Pro10100 User Manual

Security
On: Choose "On" to use security verification when turning on projector.
`
Off: Choose "Off" to be able to switch on the projector without password
`
verification.

SETTING | Signal (RGB)

Signal is supported except Video and S-Video.
Frequency
Change the display data frequency to match the frequency of your computer's
graphic card. Use this function only if the image appears to flicker vertically.
Phase
Synchronize the signal timing of the display with the graphic card. If the image
appears to be unstable or flickers, use this function to correct it.
H. Position
Press the ◄ to move the image left.
`
Press the ► to move the image right.
`
V. Position
Press the ◄ to move the image down.
`
Press the ► to move the image up.
`
Automatic
Automatically detects the signal. If you use this function, the phase, frequency items
are grayed out, and if signal is not automatic, the phase, frequency items will appear
for user to manually tune and saved in settings after that for next time projector
turns off and on again.
44