Setting Oven Controls; Setting The Clock; Changing Between Continuous Bake Or 6-Hour; Energy Saving Features - Frigidaire FGIF3061NF Important Safety Instructions Manual

Use and care guide
Hide thumbs Also See for FGIF3061NF:
Table of Contents

Advertisement

Setting the clock

When the range is first powered up, "12:00" will flash in the
display (See Fig. 1).
To set the clock to 1:30:
Step
1. Press set clock.
2. Enter 1:30.
3. Press start.
NOTE
It is recommended to always set the clock for the correct
time of day before using the appliance. The clock cannot
be changed if any timed or delayed time feature is active.
Changing between continuous bake
setting or 6-Hour Energy Saving feature
The oven control has a factory preset built-in 6 Hour Energy
Saving feature that will turn off the oven if it is left on for
more than 6 hours. The control can be programmed to
override this feature to continuously bake.
To turn off 6-Hour Energy saving mode:
Step
1. Press and hold timer on•off
for 6 seconds.
2. Press self-clean
to toggle between "6 Hr OFF"
(Fig. 2) or "StAY On" (Fig. 3).
Select "StAY On" to turn off
6-Hour Energy Saving mode.
3. Press start to accept.
Fig. 2
Press
Fig. 1
Press
Fig. 3

SETTING OVEN CONTROLS

Setting 12 or 24 hour display mode

The clock display mode allows you to choose between 12 or
24 hr mode. The factory pre-set clock display mode is 12
hr. See the example below to change the default mode to
24 hr display.
To set 12 or 24 hour mode:
Step
1. Press and hold set clock
for 6 seconds.
2. Press self-clean
to toggle between "12 Hr dAY"
or "24 Hr dAY" display modes
(See Figs. 4 & 5).
3. Press start to accept.
Fig. 4
Changing oven temperature display
The oven control is preset to display °F (Fahrenheit) when
shipped from the factory.
To change the temperature to display °C (Celsius)
(oven should not have bake or self-clean active
when setting this feature):
Step
1. Press and hold broil for
6 seconds.
2. Press self-clean to toggle
between "FAhrn ht" or
"CELSIUS" temperature display
modes (Figs. 6 & 7).
If Celsius display is needed, select
"CELSIUS".
3. Press start to accept.
Fig. 6
Press
Fig. 5
Press
Fig. 7
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Range

Table of Contents