Powering On/Off The Projector; Powering On The Projector - Optoma EH500 User Manual

N N
ote ote
Turn on the projector
first and then select the
signal sources.
N N
ote
ote
Due to the difference
in applications for each
country, some regions
may have different
accessories.
N
N
ote ote
12V OUT is a
programmable trigger.

Powering On/Off the Projector

Powering On the Projector

1. Remove the lens cover.
2. Connect the power cord to the projector.
3. Turn On the connected devices.
4. Ensure the Power LED is flashing and then press the power
button to turn On the projector.
The projector's startup logo screen displays and connected
devices are detected. If the connected device is a laptop, press
the appropriate keys on the computer keyboard to switch the
display output to the projector. (Check the user manual of the
laptop to determine the appropriate Fn key combination to change
display output.)
See Security Settings on page 35 if security lock is enabled.
5. If more than one input device is connected, press the "Source"
button sequentially to switch between devices.
For direct source selection, see page 19.
Installation
13