Optoma EH500 User Manual page 55

6. Fill in the IP address and Subnet mask, then press OK.
7. Press the Menu button on the projector.
8. Select OSD-> SETUP-> Network Settings-> Lan Settings.
9. After getting into Network Status, input the following:
DHCP: Off

IP Address: 10.10.10.10

Subnet Mask:

Gateway: 0.0.0.0

DNS: 0.0.0.0

10. Press "ENTER" / ► to confirm settings.
11. Open a web browser (ex, Microsoft Internet Explorer with Adobe
Flash Player 9.0 or higher).
12. In the Address bar, input the IP address: 10.10.10.10.
User Controls
255.255.255.0
55