Using The Remote Control - Optoma EH500 User Manual

N N
ote ote
Due to the difference
in applications for each
country, some regions
may have different
accessories.

Using the Remote Control

Volume +/- Press "Volume +/-" to adjust volume.
Adjusts image distortion caused by tilting the
V Keystone +/-
projector. (±30 degrees)
Format Refer to the "Format" on page 29.
Zoom Press "Zoom" to zoom out images.
Press until Power LED is flashing then press 01~99
Remote ID
to set the particular remote code.
Remote All Press to set remote code to all.
Press "VGA1" to choose source from VGA- IN
VGA1
connector.
S-Video Press "S-Video" to choose S-Video source.
HDMI Press "HDMI" to choose HDMI source.
Automatically synchronizes the projector to the input
Re-sync
source.
Press "VGA2" to choose source from VGA- IN
VGA2
connector.
Video Press "Video" to choose Composite video source.
DVI Press "DVI" to choose source from DVI-D connector.
BNC Press "BNC" to choose BNC source.
YPbPr Press "YPbPr" to choose YPbPr source.
DisplayPort Press "DisplayPort" to choose DisplayPort source.
3D Press "3D" to turn on/off 3D menu.
User Controls
19