Exhaust Filter; Dust Bag Changing - Kenmore 116.32712 Owner's Manual

Check m otor safety f iller f requently and
cl_ange when d irty.
WARNING
Electrical Shock Hazard
Unplug power cord from electrical
outlet. Do not operate the cleaner
without the motor safety _ter. Be
sure the filter is dry and properly
installed to prevent motor failure
and/or electrical shock.
Remove the dust bag as outiined in the
DUST BAG CHANGING section.
MOTOR SAFETY FILTER
ELECTROSTATIC
1, This white & grey
filter must be
replaced when dirlyo
It should be
replaced regularly
depending on use
conditions. The fil-
ter CANNOT be
washed as it will
lose its dust trap-
ping ability.
NOTE: See PARTS AND FEATURES for
motor safety filter number.
2, if the filter,
located in the bot-
tom of the bag
cavity, is dirty,
remove it by
pulling forward out
from under the
ribs..
3. Replace the
filter, white side Mot_r
up, by sliding it safely
back into place
under the ribs in
the bag cavity.
Replace the bag as outlined in the DUST
BAG CHANGING section.
EXHAUST FILTER
ELECTROSTATIC
The electrostatic fiiter cartridge must be
replaced when dirty.. It should be
replaced regularly depending on use con-
ditions.. The filter CANNOT be washed
as it will lose its dust trapping ability.
NOTE; See PARTS AND FEATURES for
the exhaust filter number.
Slide the Bag
exhaust filter Cover_.--_
cover release
Exhausl
Filler
down. Pult out CoverRelease_
on exhaust ill-
Exhausl
Filter
ter cover to cover/
remove from ,/_
bag cover.
Cever-_,:! I I l! _
Remove the elec-
trostatic filter car-
tridge from the
bag cover.
Replace the electro- Bag
static filter cartridge, cover_.-,
carefully positioning
it so that it fits into ExhBust
the bag cover. The Fllter_
side labeled "This ._.
aide out" should be
facing the operator.,
I
cover R ele._e-_',%..jj !
exhaest _:J I
Replace the
exhaust fitter
cover and
secure the
latch by push-
ing it upward
15