Kenmore 116.32712 Owner's Manual page 18

NOTE: See PARTS AND FEATURES for
bett number°
Loop the other end of the belt on the bolt
putley on the agitator..
Insert the agitator by placing the rounded
portion of the end cap down into the slot
in the nozzle base,
NOTE: It may be necessary to hold the
furniture guard out of the way in order to
allow proper insertion of the agitator into
the nozzle base°
Agitator Nozzle
Base
Furniture Base
Guard End Slot
Cap
NOTE: Care must be taken due to the
belt tension during reassembly,,
Check to see that the belt is centered on
the belt pulley,.Turn the agitator with your
fingers to see that it turns freely,.
Press firmly,
checking to
see that
each end is
completely
inserted..
To re-attach
the agitator
cover, insert
the six (6)
tabs into the
six slots
along the
front edge of
the nozzle Tabs/
base° slots
Lower the agitator cover to its original
position. After positioning the agitator
cover, push forward on the two (2) locking
tabs in order to ensure that they are
securely in place.
Re-fasten
the furniture
guard retain-
ers to the
posts on
both sides of
the agitator
cover°
Agitator
Cover
Fumitur_
Guard
Retainer
NOTE: If the agitator cover is not installed
correctly, you may experience a loss of
performance and possible agitator vibra-
tion, etc.
Headlight
Wire
Make sure the headlight wires are tucked
securely in
place.
Replace the
nozzle cover
and secure
the latches_
Nozzle
Cover
18