To Clean Agitator; Belt Routing - Kenmore 116.32712 Owner's Manual

TO CLEAN AGITATOR
NOTE: In order to keep cleaning elftclency
high and to prevent damage to your vacu_
urn, _tor must be
The agitator must be cleaned according to
the following schedule:
Vacuum Use Clean
HEAVY every week
(useddeity)
MODERATE every month
(used 2-3 times/week)
LIGHT every 2 months
(used 1 time/week)
Remove ant dirt or derbris in the belt path
area or in the agitator area,
Exploded View - Agitator
Assembly
C_p Agtlator Unit I "
Bolt _nd
Pu!ley Cap
Carefully remove
_.__ any string or
debris located on
the agitator, end
caps, or agitator
shaft..
End Cap
Replace the end caps, See the exploded
view for correct assembly.
TO REPLACE BELT
Make sure that the carpet/bare floor
selector is in the carpet position.
Loop the new bell on the motor shaft.
Molor
w CerpeUBaro Floor
Pulley Bell Selector Shaft
BELT ROUTING
Correct Routing of Belt
(Selector tn CarpefPosftlon)
Carpet/Bare Floor Shaft
Selec tot Shaft
Incorrect Routing of Belt
(Belt on Selector Shall)
Carpet/Bare F/oor Shaft
Selector Shall
Incorrect Routing of Belt
(Selector in Bare Floor Posfffon)
Agftalor Belt CarpeUBere Floor
Seleclor Shaft
17