Access Control - Draytek Vigor2900 Series Security Router User Manual

2 . 5 . 4 A c c e s s
2 . 5 . 4 A c c e s s
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights.
Enable Access Control
Policy
MAC Address Filter
Vigor2900 Series User's Guide
C o n t r o l
C o n t r o l
All wireless devices must support the same WEP
encryption bit size and have the same key. Four keys can
be entered here, but only one key can be selected at a time.
The keys can be entered in ASCII or Hexadecimal. Check
the key you wish to use.
Select to enable the MAC Address access control feature.
Select to enable any one of the following policy. Choose
Activate MAC address filter to type in the MAC
addresses for other clients in the network manually.
Choose Isolate WLAN from LAN will separate all the
WLAN stations from LAN based on the MAC Address list.
Display all MAC addresses that are edited before. Four
buttons (Add, Remove,
35