Front And Rear View For Vigor2900 - Draytek Vigor2900 Series Security Router User Manual

1 . 1 . 1 F r o n t a n
1 . 1 . 1 F r o n t a
LED
ACT (Activity)
DMZ
QoS
Attack
VPN
Printer
WAN
LAN (1, 2, 3, 4)
Interface
Printer
PWR
0/1
P1 – P4
WAN
Factory Reset
2
d R e a r V i e w f o
n d R e a r V i e w f o
ACT DMZ QoS Attack VPN Printer WAN
Status
Blinking
On
On
On
Blinking
On
On
Orange
Green
Blinking
Orange
Green
Blinking
PWR
Printer
Description
Connecter for a USB printer.
Connecter for a power adapter.
Power Switch.
Connecter for local networked devices.
Connecter for remote networked devices.
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
r V i g o r 2 9 0 0
r V i g o r 2 9 0 0
LAN
P1 P2 P3 P4
Explanation
The router is powered on and running properly.
DMZ Host is specified in certain site.
The QoS function is active.
DoS Defense function is active.
An attack is detected.
The VPN tunnel is launched.
The USB interface printer is ready.
A normal 10Mbps WAN link is ready.
A normal 100Mbps WAN link is ready.
Ethernet packets are transmitting.
A normal 10Mbps connection is through its
corresponding port.
A normal 100Mbps connection is through its
corresponding port.
Ethernet packets are transmitting.
P4 P3 P2
Factory
P1 Reset
WAN
Vigor2900 Series User's Guide