Table of Contents
Advertisement
Settings in Router B in the remote office:
1.
Choose VPN and Remote Access Setup on the Advanced Setup group.
2.
Select Remote Access Control Setup. The following page will appear. Enable the
necessary VPN service and click OK.
3.
Then, return to VPN and Remote Access Setup page and choose PPP General Setup.
4.
For using PPP based services, such as PPTP, L2TP, you have to set general settings in
PPP General Setup.
For using IPSec-based service, such as IPSec or L2TP with IPSec Policy, you have to
set general settings in IPSec General Setup, such as the pre-shared key that both parties
have known.
Vigor2900 Series User's Guide
141
- Quick Links:
- Front and Rear View for Vigor2900I
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2900 Series Security Router and is the answer not in the manual?
Questions and answers