Operation Checklist - GE PHP900 Installation Instructions Manual

Installation Instructions
CHECKLISTS
ITI PRE-TEST CHECKLIST
[] Remove all protective film, if present, and any
stickers.
[] Check to be sure thGt all wiring is secure and
not pinched or in contact with moving parts.
[] Check level of GppliGnce,
[] Check that the cooktop is properlg grounded.
[_ OPERATION CHECKLIST
[]
[]
[]
[]
[]
Remove all items from the top
of the cooktop surface.
Turn on the power to the cooktop.
(Refer to your Owner's Manual.) Verify that all
surfGce burners operGte properly.
Check that the circuit breaker is not tripped
nor the house fuse blown.
Check that conduit is securelg connected to
the junction box.
See Owner's Manual for troubleshooting list.
NOTE TO ELECTRICIAN:
The power leeds supplied with this appliance ere
UL recognized for connections to larger gauge
household wiring. The insulation of these leeds
is rated at temperatures much higher than the
temperature rating of household wiring. The
current carrying capacity of a conductor is
governed bg the wire gauge end also the
temperature rating of the insulation around
the wire.
NOTE: ALUMINUM WIRING
WARNING:
IMPROPER CONNECTION OF ALUMINUM
HOUSE WIRING TO THE COPPER LEADS CAN
RESULT IN A SERIOUS PROBLEM.
Splice copper wires to aluminum wiring
using special connectors designed end UL
approved for joining copper to aluminum
and follow the manufacturer's recommended
connector procedure closely.
NOTE: Wire used, location end enclosure of
splices, etc., must conform to good wiring
practice end local codes.
10