Back to Contents Page
System Board
Dell™ Vostro™ 430 Service Manual
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the System Board
1. Follow the procedures in
Before Working Inside Your
2. Remove the Cover.
3. Remove the Memory.
4. Remove the
Processor Heat-Sink and Fan
5. Remove the Processor.
6. Remove the
Expansion
Cards.
7. Disconnect the cables from all the internal devices including the system board, hard-drive(s), optical-drive(s), and expansion cards.
8. Using a Phillips head screwdriver, remove the nine screws that secure the system board to the computer chassis.
9. Slide the system board towards the front of the computer.
Computer.
Assembly.