Dell Vostro 430 Service Manual page 3

Hide thumbs Also See for Vostro 430:
Table of Contents

Advertisement

Displays the auto-detection status of SATA devices.
SATA-0–SATA-3
Determines the integrated SATA controller's operating
SATA Mode
mode.
(Default: AHCI)
Selects the power-on-self-test (POST) errors at which the
Halt On
computer must stop.
(Default: All, But Keyboard)
Advanced BIOS Configuration
Enables or disables the following features:
CPU Information
Intel® Virtualization Technology (VT)
l
Intel Hyper-threading
l
Intel SpeedStep™ 
l
Execute Disable Bit
l
Intel Turbo Mode
l
Intel C-State tech
l
The default setting is Enabled.
Enables or disables the normal POST messages.
Quick Boot
(Default: Enabled)
When Enabled, the <Num Lock> key automatically turns on when
Boot Up Num-Lock
the computer boots.
(Default: Enabled)
Enables or disables hard drive protection.
Hard Disk Protection
(Default: Enabled)
 
Boot Device Configuration
Sets the hard drive boot priority. The items displayed are dynamically updated
Hard Disk Boot Priority
according to the hard drives detected.
Sets the boot priority among the attached removable devices.
CD/DVD Drives
Sets the boot device sequence. Only the bootable devices that are connected to
1st Boot Device through
the computer are listed as options.
3rd Boot Device
Password protects the Boot Menu if a supervisor password is set.
Boot Menu Security
(Default: Enabled)
 
Advanced Chipset Features
Sets the primary video controller when there are more than one video
Initiate Graphics
controllers in the computer.
Adapter
l
(Default: PCIE/PCI)
l
Integrated Peripherals
Enables or disables the internal USB controller. No Boot enables the controller but disables the ability to boot from a USB device.
USB Controller
 
(Default: Enabled)
Enables or disables support for USB mass storage devices.
USB Storage
Function
(Default: Enabled)
Enables or disables the onboard audio controller.
Onboard Audio
Controller
(Default: Enabled)
Enables or disables the integrated network controller.
Onboard LAN
Controller
(Default: Enabled)
Enables or disables the boot ROM of the onboard network controller.
Onboard LAN Boot
ROM
AHCI
l
ATA
l
RAID
l
All Errors
l
All, But Keyboard
l
PCI/PCIE
PCIE/PCI

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents