1
tape
3
display cable
Replacing the Display Panel
1. Follow the procedures in
Before You
2. Connect the display cable to the connector on the back of the display panel, and replace the tape to secure the cable.
3. Use the alignment posts to correctly place the display panel on the display cover.
4. Replace the six screws that secure the display panel to the display cover.
5. Replace the display bezel (see
6. Replace the display assembly (see
7. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Display Panel Brackets
Removing the Display Panel Brackets
1. Follow the procedures in
Before You
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the display panel (see
5. Remove the six screws that secure the display panel brackets to the display panel.
1
display panel brackets (2)
3
display panel
Replacing the Display Panel Brackets
2
display panel
Begin.
Replacing the Display
Bezel).
Replacing the Display
Assembly).
Battery).
Begin.
Removing the Display
Assembly).
Removing the Display
Bezel).
Removing the Display
Panel).
2
screws (6)