3. Route the speaker cable in the routing guides on the computer base.
4. Connect the speaker cable to the connector on the system board.
5. Replace the four screws that secure the two speakers to the computer base.
6. Replace the palm rest (see
7. Replace the keyboard (see
8. Replace the power button panel (see
9. Replace the module cover (see
10. Replace the optical drive (see
11. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Replacing the Palm
Rest).
Replacing the
Keyboard).
Replacing the Power Button
Replacing the Module
Cover).
Replacing the Optical
Drive).
Battery).
Panel).