Table of Contents
Advertisement
1
data cable
2
power cable
4. Connect the data cable to the CD/DVD connector on the system board.
5. Gently position the drive until it clicks into place.
1
CD/DVD drive
6. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
7. Replace the computer cover (see
8. Connect your computer and devices to electrical outlets, and then turn them on.
9. See the documentation that came with the drive for instructions on installing any software required for drive operation.
10. Enter System Setup (see
Entering System
Floppy Drive (Optional)
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
Removing a Floppy Drive
1. Follow the procedures in
Before You
2. Remove the CD/DVD drive, if installed (see
3. Pull up on the drive release latch and slide the floppy drive towards the back of the computer.
3
CD/DVD connector
2
CD/DVD drive bracket
Replacing the Computer
Cover).
Setup), and then select the appropriate Drive option.
Begin.
Removing a CD/DVD
Drive).
Advertisement
Table of Contents
