Table of Contents
Advertisement
NOTICE:
To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network port or device.
2. Disconnect any telephone or network cables from the computer.
3. Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
4. Remove the computer cover (see
NOTICE:
Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the
computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.
Back to Contents Page
Removing the Computer
Cover).
Advertisement
Table of Contents
