Entering The Service Tag In The Bios - Dell Studio 1745 Service Manual

9. Replace the optical drive (see
10. Replace the media card reader board (see
11. Replace the thermal fan (see
12. Replace the Bluetooth card (see
13. Replace the palm rest (see
14. Replace the media controls board (see
15. Replace the keyboard (see
16. Replace the center control cover (see
17. Replace the coin-cell battery (see
18. Replace the hard drive(s) (see
19. Replace the Mini-Card(s) (see
20. Replace the memory module(s) (see
21. Replace the base cover (see
22. Replace the battery (see Replacing the
23. Reinstall any removed cards in the ExpressCard slot or the 8-in-1 media card reader.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
24. Turn on the computer.
NOTE: After you have replaced the system board, enter the computer Service Tag in the BIOS of the replacement system board.
25. Enter the service tag (see Entering the Service Tag in the
Entering the Service Tag in the BIOS
1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.
2. Turn on the computer.
3. Press <F2> during POST to enter the system setup program.
4. Navigate to the security tab and enter the service tag in the Set Service Tag field.
Back to Contents Page
Replacing the Optical Drive).
Replacing the Media Card Reader
Replacing the Thermal Fan).
Replacing the Bluetooth Card).
Replacing the Palm Rest).
Replacing the Media Controls
Replacing the Keyboard).
Replacing the Center Control
Replacing the Coin-Cell Battery).
Replacing the Hard Drive(s)).
Replacing the Mini-Card).
Replacing the Memory Module(s)).
Replacing the Base Cover).
Battery).
BIOS).
Board).
Board).
Cover).