Dell Studio 1745 Service Manual page 31

1 hard drive
3 hard drive cage
For hard drive 2:
l
Remove the three screws that secure the hard drive assembly to the computer base.
¡
Using the pull-tab, lift the hard drive to disconnect the hard drive from the connector on the system board.
¡
Lift the hard drive assembly out of the computer base.
¡
1 screws (3) 2
3 pull-tab
Remove the four screws that secure the hard drive cage to the hard drive.
¡
1 hard drive
3 hard drive cage
Pull the interposer to disconnect it from the hard drive.
¡
2 screws (4)
hard drive assembly
2 screws (4)