Replacing The Keyboard - Dell Studio 1745 Service Manual

Replacing the Keyboard
1. Follow the procedures in Before You
2. Slide the keyboard cable into the connector on the system board. Press down on the connector latch to secure the cable to the system board connector.
3. Slide the backlit keyboard cable into the connector on the system board. Press down on the connector latch to secure the cable to the system board
connector.
4. Align the six tabs on the keyboard with the slots on the palm rest.
5. Place the keyboard on the palm rest.
6. Replace the four screws that secure the keyboard to the palm rest.
7. Replace the center control cover (see
8. Replace the battery (see Replacing the
Back to Contents Page
Begin.
Replacing the Center Control Cover).
Battery).