Managing And Maintaining D-Link Access Points; Resetting The Access Points; Figure 47. Access Point Reset - D-Link Unified Access System DWS-3000 Series User Manual

Managing and Maintaining D-Link
Access Points
This chapter contains the following sections to help you manage and maintain the D-Link
Access Points on your D-Link Unified Access System network:
•

Resetting the Access Points

• Managing Radio Frequency Settings
• Upgrading the Access Point Software
• Performing Advanced Access Point Management
For information about the commands you use to manage and maintain the APs by using the
CLI, see the D-Link CLI Command Reference.
Resetting the Access Points
You can manually reset one or all APs from the D-Link WLAN Controller Switch. When you
issue the command to reset an AP, the AP closes the SSL connection to the switch before
resetting the hardware.
To reset one or more APs, click AP Management > Reset.

Figure 47. Access Point Reset

Select the APs you want to reset and click Reset, or click Reset All to reset all of the APs
managed by the switch.
Resetting the Access Points
6
103