Preparing To Install The Access Point; Default Settings For The Unified Access Points; Table 2. Ap Default Settings - D-Link DWL-8500AP - AirPremier AG Wireless Switching 108 Dualband Access Point Administrator's Manual

Preparing to Install the Access Point

Before you power on a new D-Link Access Point, review the following sections to check
required hardware and software components, client configurations, and compatibility issues.
Make sure you have everything you need for a successful launch and test of your new or
extended wireless network.
This chapter contains the following sections:
•

Default Settings for the Unified Access Points

• Administrator's Computer Requirements
• Wireless Client Requirements
• Dynamic and Static IP Addressing on the AP
• Using the Reset Button
Default Settings for the Unified Access Points
When you first power on a Unified Access Point, it has the default settings that

Table 2. AP Default Settings

Feature
System Information
Ethernet Interface Settings
Radio Settings: DWL-8500AP
User Name
Password
Connection Type
DHCP
IP Address
Subnet Mask
DNS Name
Management VLAN ID
Untagged VLAN ID
Radio (1 and 2)
Default
admin
admin
DHCP
Enabled
10.90.90.91 (if no DHCP server is available)
255.0.0.0
None
1
1
On
Default Settings for the Unified Access Points
2
Table 2 shows
19