Default D-Link Access Point Profile Settings; Table 59. Ap Default Ap Profile Settings - D-Link Unified Access System DWS-3000 Series User Manual

D-Link Unified Access System User Manual
Table 58. Switch Defaults
WLAN Information

Default D-Link Access Point Profile Settings

Table 59
Point associates with the switch, the settings in this table are assigned to the AP upon
successful AP validation.

Table 59. AP Default AP Profile Settings

System Information
Network Information
176 © 2001- 2006 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
Feature
Wireless Switch Mode
AP Authentication
AP Validation
Country Code
Default Profile Name
Peer Switch Group ID
L2 (VLAN) /L3 (IP) Discovery
SNMP Traps
Client Roam Timeout
Ad Hoc Client Status
AP Failure Status
Client Failure Status
RF Scan Status
shows the AP settings for the default profile. By default, when a D-Link Access
Feature
User Name
Password
DHCP Client
Management IP Address
Subnet Mask
Management VLAN
Untagged VLAN
Default
Enabled
Disabled
Local
US
Default
1
Enabled
Disabled
30 seconds
24 hours
24 hours
24 hours
24 hours
Default
admin
admin
Enabled
10.90.90.91 (If not assigned by DHCP)
255.0.0.0 (If not assigned by DHCP)
1
1