Removing The I/O Panel - Dell OptiPlex 780 Ultra Small Form Factor Service Manual

Back to Contents Page
I/O Panel
Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage
at www.dell.com/regulatory_compliance.

Removing the I/O Panel

NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
2. Remove the cover.
3. Remove the front
4. Remove the drive
5. Disconnect the I/O panel data cable from the system board.
Before Working Inside Your
bezel.
cage.
Computer.