Removing The Heat Sink And Processor - Dell OptiPlex 780 Ultra Small Form Factor Service Manual

Back to Contents Page
Heat Sink and Processor
Dell™ OptiPlex™ 780 Ultra Small Form Factor—Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage
at www.dell.com/regulatory_compliance.

Removing the Heat Sink and Processor

NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
2. Remove the cover.
3. Remove the front
4. Remove the drive
5. Disconnect the fan cable from the system board.
Before Working Inside Your
bezel.
cage.
Computer.