Replacing The Hard-Drive Assembly - Dell Inspiron 1090 Service Manual

3 screw
10. Remove the four screws that secure the hard drive to the hard-drive bracket.
11. Lift the hard-drive bracket away from the hard drive.
1 hard-drive bracket 2 screws (4)
Replacing the Hard-Drive Assembly
1. Follow the instructions in Before You
2. Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
3. Place the hard drive in the hard-drive bracket.
4. Replace the four screws that secure the hard drive to the hard-drive bracket.
5. Place the hard-drive assembly in the computer base.
6. Push the hard-drive assembly towards the left to connect it to the connector on the system board.
7. Replace the screw that secures the hard-drive assembly to the computer base.
8. Replace the memory module (see
9. Replace the battery (see Replacing the
10. Replace the palm-rest assembly (see
11. Replace the keyboard (see
12. Replace the label door (see
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the Memory Module).
Battery).
Replacing the Palm-Rest
Replacing the Keyboard).
Replacing the Label Door).
Assembly).