Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Hinge Caps
Removing the Hinge Caps
1. Follow the instructions in
Before You
2. Remove the display assembly (see
3. Press and lift the hinge caps to release the hinge-cap tabs from the display frame. Note the routing of the cables that are routed beneath the hinge
caps.
1
hinge caps (2)
Replacing the Hinge Caps
1. Place the cables in position over the display hinges.
2. Place the hinge caps in position and snap them into place.
3. Replace the display assembly (see
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may