Replacing The Hard-Drive Assembly - Dell Inspiron 14z N411z Owner's Manual

1 hard drive
3 screws (4)

Replacing the Hard-Drive Assembly

1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the replacement hard drive from its packaging. Save the packaging
for storing or shipping the old hard drive.
3 Align the screw holes on the hard-drive bracket with the screw holes on the
hard drive.
4 Replace the four screws that secure the hard-drive bracket to the hard
drive.
5 Place the hard-drive assembly in the computer base.
6 Using the pull-tab, slide the hard-drive assembly into the connector on the
system board.
7 Replace the four screws that secure the hard-drive assembly to the
computer base.
8 Replace the module cover. See "Replacing the Module Cover" on page 16.
2 hard-drive bracket
Hard-Drive Assembly
1
2
3
21