Assembly Of Lcd Hinge; Line Processing Of Antenna Cable And Lcd Cable - Panasonic Toughbook CF-19CHBAXBM Service Manual

n Assembly of LCD Hinge
Initial Condition
of LCD Hinge
Rotation Direction
n Line Processing of Antenna Cable and LCD Cable
You will hear the sound when they are firmly jointed.
Cable Holder
Pass the Cables through it, and then fix it to the Hinge.
(Fix directly the other side.)
For fixing, hold the Hinge parallel to the LCD.
LCD Rear side
LCD Cable Holder
Joint it to the Hinge Cover hook after
connecting the cable to the notch.
Safety Working
Cable Hold Plate
Screw
LCD Hinge
Safety Working
Allow some cable margin.
Margin: 22 3 mm
Lock Plate Assy
Turn the Cable
360 degree.
Wind the Antenna cable first.
Protect Sheet
Process in the order of black/white/blue/gray/brown cables from the left.
(This process does not need if there are not cables.)
Ensure the "C" side comes
to the lower right corner
when viewing from above.
Cable Hold Plate
Safety Working
Avoid catching the Cable.
Screw
Avoid catching the Cable (when repairing or when not using the jig).
Temporarily fix the both sides ("A") of the Hinge using the Screw, and fix the Cable Hold Plate.
After fixing the Cable Hold Plate, remove the screws from the both sides ("A").
Lock Spring
Insert the Lock Spring (the bottom diameter is shorter),
and then insert the Lock Plate from above.
9-15
Using the fixing jig when fixing the Hinge
Fix Fix
Tighten
If you arrange the Cable in the area,
you do not need to use the fixing jig.
Rotation Direction
Hinge Cover Assy