Putting Of The Sheet; Cautions For Setting The Keyboard - Panasonic Toughbook CF-19CHBAXBM Service Manual

n Putting of the Sheet
LCD Cushion Sheet
Avoid running over.
0.5 to 1mm
Palmrest Waterproof Sheet L
Attach it using the jig
Fold over the front and attach it.
Because the sheets described on this page are waterproof sheets,
the whole parts should be put pressure after attaching.
(Especially, put pressure around the sheets.)
*Apply the load to attach.
30 to 40N (3.0 to 4.0Kgf)
n Cautions for Setting the Keyboard
Safety Working
Connect part the LCD CABLE/KBD FFC
Connect the Connector
to the dotted part.
Note:
Hold the Connector part when
connecting/disconnecting.
Do not bend at the foot of
stiffening plate.
Do not bend at the foot of
stiffening plate.
KBD FFC insert parts
Connect the LCD CABLE
Incline to the right.
Avoid running over the Top Case
Connect the KBD FFC
After inserting the FFC,
lock the Connector.
Ensure it does not come
over the end of the rib.
0 0.5mm
The paste should be
put the left side.
KB CNT Hole Cushion
0 0.5mm
Avoid coming over.
0 to 0.5 mm
Avoid coming over.
0 to 0.5 mm
Click Button Plate
0.5 1.5mm
TP Tape
Avoid running over other sheets.
Order of fixing
Screw Screw Screw
Screw Screw Screw Screw
Screw
Screw
Screw
Connect the Keyboard FFC
Keyboard Ass'y
Set using the jig.
LCD Cushion Sheet
Ensure it does not come
over the end of the rib.
Gasket E
Fit to the wall of the end side, and
put the surplus to the Cabinet side.
0 0.5mm
KBD Waterproof Sheet C
Match to the circles.
0 to 0.5mm
Avoid coming over.
0 to 0.5 mm
Avoid running over.
0.5 to 1mm
Palmrest Waterproof Sheet R
0 0.5mm
0 0.5mm
Attach it using the jig
Fold over the front and attach it.
Keyboard Connector Lid Ass'y
Apply the load to attach. 30 to 40N
(3.0 to 4.0 Kgf)
Use the fixing jig
KB Connector Lid
Keyboard Connector Lid Sheet
Rotate the LCD to make the
LCD display face front after
setting the KBD.
Fix from the Hinge side.
Keyboard Plate(L)
KBD Connector LID Ass'y
Before setting the KBD
Plate (L) and the KBD
Plate (R), press on the
positions (four) with the
two-sided tapes.
30N(3.0Kgf)
9-36
Attach it using the jig
Screw
Screw
Screw Fix from the Hinge side.
Screw
Keyboard Plate(R)